- Current: Home
- Support
- Firmware(Windows)
- MAGIC-NS Lite
MAGIC-NS Lite Wireless Controller Adapter M:V1.08 S:V1.39: Compatible with Evercade VS console and Fixed some known issues
- Product :
- MAGIC-NS Lite USB Wireless Adapter
- Item No. :
- MAGIC-NS Lite
- Version No :
- M:V1.08_S:V1.39
- File Type :
- exe
V1.08(V1.39)
1. Compatible with Evercade VS console （switch to XINPUT mode for MAGIC-NS Lite）
Note：
Not compatible with the Evercade VS controller
2. Optimise the input lag on PC
3. Share = Capture/TPAD for Xbox Series S/X controller
4. Fixed some known issues below
Xbox Elite Series 2 controller did not work properly with the MAGIC-NS Lite
the buttons L2/R2 of Google Stadia controller do not work properly
the LT/RT buttons lost analog signal after upgrading the Xbox controller
5. Compatible with more third party controllers
| Type | Model NO. | Wireless | Type | Model NO. | Wireless | |
| Nintendo Switch Online N64 Controller | HAC-043 | BT | 8BitDo Ultimate 2C Wireless/Wired Controller | 6922621505945 | BT (switch to XINPUT mode for the controller) | |
| Nintendo Switch Online Super Famicom Controller | HAC-042 | BT | 8Bitdo SNK NEOGEO Controller | 80HC | BT (switch to XINPUT mode for the controller) | |
| Razer RAIJU MOBILE Gaming Controller | RZ06-0280 | BT（Have to re-connect after each disconnection） | GameSir Nova Lite Wireless Controller | GameSir T4N LITE | BT | |
| PDP Nintendo Switch REALMz Wireless Controller Minecraft Forest Biome | 500-234-STV | BT | PS5 Access Controller | CFI-ZAC1 | BT | |
| PDP Gaming Afterglow Wave Enhanced Wired Controller | 049-024-WH | BT | AOLION Wireless Gaming Switch Controller | AL-NS2286 | BT | |
| ManbaOne Interactive Screen Wireless Gaming Controller | Manba One | BT (switch to PC/Switch mode for the controller) |
Quick Start
Download the software from https://www.mayflash.com/Support and install it on your Windows system.
Double click on the updater and leave the updater window open on your screen.
Press and hold the button on the side of the adapter, and connect the USB from your adapter in o any spare port on your PC.
As soon as the driver window indicates under “Device” that the adapter has been recognized, you may release the button.
select “update”.
Do not disconnect the device until you are informed that the updated was completed successfully.
The update process is slow, please be patient. If there are any errors in the update process, please try it again.
If you are having the issues connecting a Xbox Series S/X controller to the MAGIC-NS 2 for using with a Nintendo Switch, please disable or turn off any Bluetooth device (like your Smart TV or Set Top Box etc.) within range of the controller, and sync the controller and adapter again.
Switch Pro mode (the LED indicator is purple)
To make sure the system can identify the adapter easily, please turn on the “Pro Controller Wired Communication” of the Nintendo Switch system.
once you switch the adapter to the Switch Pro mode (the LED indicator is purple) .
Tips: System Settings - Controllers and Sensors - Pro Controller Wired Communication – ON.
More Instructions
Download the firmware from https://www.mayflash.com/Support and install it on your Windows system.
Press and hold the button on the top of the adapter, and connect the USB from your adapter in o any spare port on your PC, and wait for 3-5 seconds. After completing the above steps, the program automatically identifies the adapter (LED indicator turns off).
Click "update" and wait for a few seconds. The update is completed when the progress bar reaches 100%.
Note: Do not disconnect the device until you are informed that the updated was completed successfully
Press "OK" to complete the update.
