Arcade Stick F300 V1.20: Change the button mapping profile for NEOGEO Arcade Stick PRO to 8 buttons

2022-11-17 16:15:16
Product :
MAYFLASH ARCADE STICK F300
Item No. :
F300
Version No :
V1.20
File Type :
Download

Change the button mapping profile for NEOGEO Arcade Stick PRO to 8 buttons (only supports 4 buttons before).



This manual describes how to update the firmware of MAYFLASH F300.

NOTE : The update must be done on a PC (Window OS); it cannot be done on a console individually .

NOTE : Make sure your PC is connected to the internet.

NOTE : Disable antivirus before executing the program.


Quick Start

  1. Download the firmware from https://www.mayflash.com/Support and install it on your Windows system.

  2. Double click on the firmware and leave the firmware window open on your screen.

  3. Press and hold “HOME” button on the Arcade Stick F300.

  4. Connect the Arcade Stick F300 directly to a USB interface on your PC, still holding “HOME” button at entire time.

  5. As soon as the updater window indicates under “Device” that the Arcade stcik F300 has been recognized, you may release “HOME” button.

  6. select “update”

  7. Do not disconnect the device until you are informed that the updated was completed successfully.


More Instructions

  1. Download the firmware from https://www.mayflash.com/Support and install it on your Windows system


    MAYFLASH Limited

  2. Press and hold “HOME” button on the Arcade Stick F300. Plug the USB cable of F300 in o your PC.


    MAYFLASH Limited

  3. As soon as the updater window indicates under “Device” that the Arcade stcik F300 has been recognized, you may release “HOME” button. select “update”.

    Noted:Do not disconnect or unplug the Joystick until the updated was completed successfully.


    MAYFLASH Limited

  4. Press "OK" to complete the update.

    MAYFLASH Limited