SNES Controller Adapter (MF105) V1.00.23.08: AB,XY remapping and ZL+ZR supported

2023-05-31 16:45:34
Product :
SNES Controller Adapter for Nintendo Switch, Windows
Item No. :
MF105
Version No :
V1.00.23.08
File Type :
exe
Download

V1.00.23.08

1. AB,XY Buttons Remapping:
- To remap A=B/B=A, X=Y/Y=X by pressing and holding Start + X for 3 seconds.
- Reset to default A=A/B=B,X=X/Y=Y by pressing and holding Start + Y for 3 seconds .
2. ZL+ZR is supported by pressing Start + ↓(Dpad-Down)at the same time .



Quick Start

  1. Download the firmware from https://www.mayflash.com/Support and install it on your Windows system.

  2. Double click on the updater and leave the updater window open on your screen

  3. Press and hold the HOME button on the adapter, and connect the USB from your adapter in o any spare port on your PC.

  4. As soon as the driver window indicates under “Device” that the adapter has been recognized, you may release the button.

  5. select “update”.

  6. Do not disconnect the device until you are informed that the updated was completed successfully.


More Instructions

  1. Download the firmware from https://www.mayflash.com/Support/and install it on your Windows system


    MAYFLASH Limited

  2. Press and hold the HOME button on the adapter, and connect the USB from your adapter in o any available port on your PC.

    MAYFLASH Limited

  3. You may release the button as soon as the driver window indicates under “Device” that the adapter has been recognized.select “update”;Twait for the program to upgrade automatically. The progress bar will run twice for completion.

    Do not disconnect the device until you have been informed that the update was completed successfully.

    MAYFLASH Limited

  4. Press “OK”

    MAYFLASH Limited