Magic-S Wireless Controller Adapter(For Magic-S Rev 1.1) V1.07: 1. Compatible with SNK NEOGEO Arcade Stick PRO 2. Fix the bug that the Xbox One Controller updated to V4.8.1923.0 can't work

2022-11-21 15:24:27
Product :
MAGIC-S(For Magic-S Rev 1.1)
Item No. :
Version No :
V1.07
File Type :
Download

V1.07 (For Magic-S Rev 1.1)

1. Compatible with SNK NEOGEO Arcade Stick PRO

- NEOGEO Console Mode Quick Start

1)Turn on your NEOGEO Arcade Stick Pro and connect it to your TV.

2)Switch to the Console Mode via using the switch on the side of the Arcade Stick

3)Connect your Magic-S to your NEOGEO Arcade Stick Pro via a Type-C cable.

4)Connect your Controller with Magic-S via Bluetooth or a USB cable.

5)The Bluetooth has been paired if the LED indictor lights up and your controller is ready to use now.


- NEOGEO Joystick Mode Quick Start

1)Switch the NEOGEO Aracde Stick Pro to the Joystick Mode and 1 NEOGEO mini via using the two switches on side of the Arcade Stick.

2)Connect your NEOGEO Arcade Stick Pro to your Magic-S.

3)Connect your Magic-S to your Nintendo Switch or PS4.

4)You are ready to play now.


2. Fix the bug that the Xbox One Controller updated to V4.8.1923.0 can't work.




Note: This firmware update only supports MAYFLASH Magic-S, NOT Magic-S Rev 1.1.

Please check the product version on the back side (sticker) of the Magic-S.

MAYFLASH Limited

Quick Start

  1. Download the software from https://www.mayflash.com/Support and install it on your Windows system.

  2. Double click on the updater and leave the updater window open on your screen.

  3. Press and hold the button on the side of the adapter, and connect the USB from your adapter in o any spare port on your PC.

  4. As soon as the driver window indicates under “Device” that the adapter has been recognized, you may release the button.

  5. select “update”.

  6. Do not disconnect the device until you are informed that the updated was completed successfully.



Switch Pro mode (the LED indicator is purple)

To make sure the system can identify the adapter easily, please turn on the “Pro Controller Wired Communication” of the Nintendo Switch system.

once you switch the adapter to the Switch Pro mode (the LED indicator is purple) .

Tips: System Settings - Controllers and Sensors - Pro Controller Wired Communication – ON.

MAYFLASH Limited


More Instructions

  1. Download the firmware from https://www.mayflash.com/Support and install it on your Windows system.

    MAYFLASH Limited

  2. Press and hold the button on the side of the adapter, and connect the USB from your adapter in o any spare port on your PC, and wait for 3-5 seconds. After completing the above steps, the program automatically identifies the adapter (LED indicator turns off).

    MAYFLASH Limited

  3. Click "update" and wait for a few seconds. The update is completed when the progress bar reaches 100%.

    Note: Do not disconnect the device until you are informed that the updated was completed successfully


    MAYFLASH Limited

  4. Press "OK" to complete the update.

    MAYFLASH Limited