Arcade Stick F500 V1.16: Supports NEOGEO mini

2018-09-26 13:00:53
Product :
MAYFLASH ARCADE STICK F500
Item No. :
F500
Version No :
V1.16
File Type :
EXE
Download

V1.16

- Supports NEOGEO mini

1. Push the switch located on the left top corner of F500 to the "DINPUT/PS3" mode. Push the switch "X/Y and DPAD" located on the left top corner of F500 to the "DPAD" mode.

F500 will be recognized by NEOGEO mini automatically.

2. If you connect the F500 to your PC windows system, please press and hold "START" and "Y/△" for 3-5 seconds to switch to DINPUT mode.

3. F500 will be recognized by PS3 as soon as you connect the F500 to your PS3 system.

- Pressing and holding "SELECT" and "START" works as "Capture" when you use the F500 on Nintendo Switch system.



Note: Please check the arcade stick version carefully before updating.

MAYFLASH Limited

This manual describes how to update the firmware of MAYFLASH F500.

NOTE : The update must be done on a PC (Window OS); it cannot be done on a console individually .

NOTE : Make sure your PC is connected to the internet.

NOTE : Disable antivirus before executing the program.


Quick Start

  1. Download the firmware from https://www.mayflash.com/Support and install it on your Windows system.

  2. Double click on the firmware and leave the firmware window open on your screen.

  3. Press and hold “Start" and "Select” button on the Arcade Stick F500 .

  4. Connect the Arcade Stick F500 directly to a USB interface on your PC, still holding “Start" and "Select" button at entire time.

  5. As soon as the updater window indicates under “Device” that the Arcade stcik F500 has been recognized, you may release “Start" and "Select" button.

  6. Select “Update”

  7. Do not disconnect the device until you are informed that the updated was completed successfully.


More Instructions

  1. Download the firmware from https://www.mayflash.com/Support and install it on your Windows system


    MAYFLASH Limited

  2. Press and hold “Start" and "Select" button on the Arcade Stick F500. Plug the USB cable of F500 into your PC.


    MAYFLASH Limited

  3. As soon as the updater window indicates under “Device” that the Arcade stcik F500 has been recognized, you may release “Start" and "Select" button. Select “Update”.

    Noted:Do not disconnect or unplug the Joystick until the updated was completed successfully.


    MAYFLASH Limited

  4. Press "OK" to complete the update.

    MAYFLASH Limited