Arcade Stick F500 V1.14: Supports Nintendo Switch

2022-11-16 16:52:33
Product :
MAYFLASH ARCADE STICK F500
Item No. :
F500
Version No :
V1.14
File Type :
Download

V1.14

Supports Nintendo Switch

Notes:

1. Please push the switch located on the left top corner of the F500 Arcade Stick to the "Xinput" mode

The F500 can be identified by the Nintendo Switch system and PC system automatically.

2. If the F500 can not be identified by the Switch and PC system automatically, please switch to the Xinput mode by pressing and holding "START" and "Y/△" for 3 seconds,

or switch to the Nintendo Switch mode by pressing and holding "START" and "X/□" for 3 seconds.


Note: Please check the arcade stick version carefully before updating.

MAYFLASH Limited

This manual describes how to update the firmware of MAYFLASH F500.

NOTE : The update must be done on a PC (Window OS); it cannot be done on a console individually .

NOTE : Make sure your PC is connected to the internet.

NOTE : Disable antivirus before executing the program.


Quick Start

  1. Download the firmware from https://www.mayflash.com/Support and install it on your Windows system.

  2. Double click on the firmware and leave the firmware window open on your screen.

  3. Press and hold “Start" and "select” button on the Arcade Stick F500 .

  4. Connect the Arcade Stick F500 directly to a USB interface on your PC, still holding “Start" and "select" button at entire time.

  5. As soon as the updater window indicates under “Device” that the Arcade stcik F500 has been recognized, you may release “Start" and "select" button.

  6. select “update”

  7. Do not disconnect the device until you are informed that the updated was completed successfully.


More Instructions

  1. Download the firmware from https://www.mayflash.com/Support and install it on your Windows system

    MAYFLASH Limited

  2. Press and hold “Start" and "select" button on the Arcade Stick F500. Plug the USB cable of F500 in o your PC.

    MAYFLASH Limited

  3. As soon as the updater window indicates under “Device” that the Arcade stcik F500 has been recognized, you may release “Start" and "select" button. select “update”.

    Noted:Do not disconnect or unplug the Joystick until the updated was completed successfully.


    MAYFLASH Limited

  4. Press "OK" to complete the update.

    MAYFLASH Limited