Wireless Sensor DolphinBar (W010) V05: Supports TR WiiMotes Supports the newest Dolphin 4.0-2241 and above

2015-08-27 17:19:48
Product :
Wireless Sensor DolphinBar(Wiimote to PC USB )
Item No. :
W010
Version No :
V05
File Type :
EXE
Download

XP/Vista and Windows 7/8/10 ,32 bit and 64 bit


Supports TR WiiMotes Supports the newest Dolphin 4.0-2241 and above


W010 Wireless Sensor DolphinBar Update Note

1.       Question: Why do we need to release this update software?

Answer: A few clients complained that the infrared LED might be not working with extended use. The update software will help you to turn off the infrared LED when you do not connect the Wii Remote.

2.       How to upgrade it?

-          Firstly run the update software

-          Press and hold the SYNC button on the Sensor DolphinBar, then connect the USB cable to your computer

-          Click “ Update Firmware” to upgrade it

-          Unplug the USB cable after the upgrading

Reminder: The Wireless Sensor DolphinBar can NOT be used on the Wii U Game System as a normal Wii U sensor bar after this upgrading.

3.       Warm Tips

Please unplug the Wireless Sensor DolphinBar when not in use to try to avoid the infrared LEDs not working with extended use.




Quick Start

  1. Download the firmware from https://www.mayflash.com/Support and install it on your Windows system.

  2. Double click on the firmware and leave the firmware window open on your screen.

  3. Press and hold the SYNC button on the adapter.

  4. Connect the adapter directly to a USB interface on your PC, still holding the SYNC button the entire time

  5. As soon as the firmware window indicates under “Device” that the adapter has been recognized, you may release the SYNC button

  6. Select “Update”

  7. Do not disconnect the device until you are informed that the updated was completed successfully.


More Instructions

  1. Download the firmware from https://www.mayflash.com/Support and install it on your Windows PC.

    MAYFLASH Limited

  2. Press & hold SYNC button (please do not release this button) and then connect the Dolphinbar to PC.

    MAYFLASH Limited

  3. Upon waiting for a few seconds, “Update Firmware” interface will switch from grey to black color. Release SYNC button and click “Update Firmware”.

    Do not disconnect the device until you are informed that the updated was completed successfully.

    MAYFLASH Limited

    MAYFLASH Limited