Magic-S Pro Wireless Controller Adapter V1.14: Touchpad supported perfectly while connecting DualSense controller on PS4 system

2024-03-25 11:43:32
Product :
Wireless Controller Adapter for Switch, PS4, PS3, PC, NEOGEO mini, PS Classic
Item No. :
MAGIC-S PRO
Version No :
V1.14
File Type :
exe
Download

V1.14

1.Touchpad supported perfectly while connecting DualSense controller on PS4 system.

2. Compatible with more original and the third party controllers as below.


TYPEWIREDWIRELESS
DualSense Wireless Controller(Original)CFI-ZCT1W
DualSense Edge Wireless ControllerCFI-ZCP1 
DualSense Wireless Controller(Slim)CFI-ZCT1NB
Mad Catz Street Fighter V FightPad PRO for PS4 & PS3
PS3 Move Navigation ControllerCECH-ZCS1U
GuliKit KingKong 2 Pro ControllerNS09


(switch to Android Mode and 6-axis Motion Control is not supported )

ipega SW001 Wireless ControllerPG-SW001
Flydigi Direwolf Wireless Gaming ControllerDirewolfBT & 2.4G(switch to iOS Mode for the controller when BT connection and 6-axis Motion Control is not supported)
BEITONG Zeus Wireless ControllerBTP-T6


(2.4G is not supported   BT:Press&hold FN+LB first and then press POWER button )

BEITONG Zeus 2 Wireless ControllerBTP-T9

(2.4G is not supported   BT:press&hold FN + LB first and then press POWER button )

Razer Atrox Arcade Stick For Xbox OneRZ06-0115
●: Yes  ○: No



Quick Start

  1. Download the software from https://www.mayflash.com/Support and install it on your Windows system.

  2. Double click on the updater and leave the updater window open on your screen.

  3. Press and hold the button on the side of the adapter, and connect the USB from your adapter in o any spare port on your PC.

  4. As soon as the driver window indicates under “Device” that the adapter has been recognized, you may release the button.

  5. select “update”.

  6. Do not disconnect the device until you are informed that the updated was completed successfully.



Switch Pro mode (the LED indicator is purple)

To make sure the system can identify the adapter easily, please turn on the “Pro Controller Wired Communication” of the Nintendo Switch system.

once you switch the adapter to the Switch Pro mode (the LED indicator is purple) .

Tips: System Settings - Controllers and Sensors - Pro Controller Wired Communication – ON.

MAYFLASH Limited


More Instructions

  1. Download the firmware from https://www.mayflash.com/Support and install it on your Windows system.

    MAYFLASH Limited

  2. Press and hold the button on the side of the adapter, and connect the USB from your adapter in o any spare port on your PC, and wait for 3-5 seconds. After completing the above steps, the program automatically identifies the adapter (LED indicator turns off).

    MAYFLASH Limited

  3. Click "update" and wait for a few seconds. The update is completed when the progress bar reaches 100%.

    Note: Do not disconnect the device until you are informed that the updated was completed successfully


    MAYFLASH Limited

  4. Press "OK" to complete the update.

    MAYFLASH Limited