System Compatibility
PS4 . Switch 2/Switch . macOS . Windows . Raspberry Pi. PS3 . NEOGEO mini . SNK NEOGEO Arcade Stick PRO . PS Classic Mini . SEGA Genesis Mini . SEGA Mega Drive Mini . Sega Astro City Mini
Controller Compatibility
Bluetooth Controllers:
DualSense, DualShock 4, DualShock 3, Xbox Series X/S, Xbox One Bluetooth controllers, Xbox Elite Wireless Controller Series 2, Switch Pro, Switch Joy-Con, Wii Remote, Wii U Pro.
Wired USB Controllers:
DualSense, DualShock 4, DualShock 3,Xbox Bluetooth Controller, Switch Pro, ASTRO Gaming C40 TR Controller PlayStation 4, PlayStation 4 SCUF Vantage 2 Controller, SEGA MEGA DRIVE and SEGA Genesis Mini USB Controller Pads, Logitech rumble gamepad F510 and F310, PS Classic Controller, Switch Taiko Drum, PS4 Taiko Drum.
The wireless controller that comes from your console will become a wired controller by simply connecting a standard USB cable (with exception of Xbox 360 which requires an official Microsoft wired Xbox 360 controller). For best results, it is recommended that you use original SwitchControllers, or genuine Xbox or PlayStation controllers and quality certified USB cables.
Special Features
Supports 6-axis motion (gyroscope) on PS4 and Switch. Supports rumble on PS4, Switch, Xinput and PS3.
The vibration intensity and dead zone can be adjusted. 7 levels of the vibration intensity and deadzone.
Supports Turbo and Touch-pad, Touch-pad supported only on PlayStation4 system.
Touch-pad supported perfectly while connecting PS DualSense controller on PS4 system.
Supports Bluetooth headsets on PS4 and Switch.
The buttons A, B, X, Y can be exchanged.
Lag – free.
A customized high quality USB Type-C Cable included.
update to the latest firmware at mayflash.com.
Dimensions and Weight
73*21*8.7mm
11g
Includes
MAGIC-S PRO 2 Adapter . USB Type C Cable . Manual
LED Indicators
Adjust the vibration and dead zone
Supports Turbo and Auto fire
TURBO SETUP:
Going to the SETUP MODE by Pressing and holding "View"+"↑" (Dpad) for 3secs(LED be blinking and controller vibrates shortly).
Press once "View"+the button on the controller(only 8 buttons can be setup . E.G Xbox One controller ，there are A,B,X,Y,LB,LT,RB,RT) . Such as press once "View" +"B" ，the "B" is Turbo button . Second press "View" +"B" ,"B" is Auto Fire button . Third press "View" +"B" , Turbo and auto fire of "B" button will be cancelled .
Turbo speed adjust ，Default speed is 15times/sec ，Press once "View"+"←" ,Turbo speed adjusted to 5times/sec .，Press once "View"+ "→" ,Turbo speed adjusted to 25times/sec .
Exit TURBO MODE by pressing and holding "View" for + "↓" 3secs .
Note：
Turbo CAN be remembered if the controller disconnect with Mayflash adapter or Mayflash adapter disconnect with game console/PC or Reboot game console /awake from sleep mode etc after exit TURBO MODE . Otherwise ，it won't be remembered .
Select button doesn't work while TURBO is active . "View" + "HOME/Xbox/PS" combination buttons ="View"
The input lag of A,B,X,Y,LT ,RT ,LB,RB will rising than before if setup it as Turbo！
Touch-Pad supported （Only for PS4 console）
Going to the SETUP MODE by Pressing and holding "View" + "R3"" （"R3" is the pressing-down button of the right joystick），and then release "R3" ，DONOT release "View" once LED be blinking and controller vibrates shortly.
Still holding "View" button to push joystick UP, DOWN, RIGHT, LEFT setup as Tpad-UP, DOWN ,RIGHT, LEFT , Press R3 setup as Pressing-Tpad button.
Exit Touch-pad by releasing "View".
A Customized USB C Cable Included
A Customized High Quality USB Type C Cable Included.
Supports Bluetooth Headset
Supports Bluetooth headsets on PS4 mode (Indicator Blue) and Switch mode (Indicator Red).
Note:
PS4 mode works with both A2DP(High quality audio signals) and HFP(Audio and chatting) connections. Switch mode only works with A2DP connection.
To use HFP connection on PS4, press and hold the START + X/□ button on your controller.
To use A2DP connection on PS4, press and hold the START + Y/△ button on your controller.
Switch mode (LED is Red) does not support 6-axis motion and vibration. If you need the 6-axis motion and vibration, please go to Switch Pro mode (LED is Purple).
MAGIC-S PRO 1 and MAGIC-S PRO 2 Difference
| System Compatibility | Special Features |
|
|
| Controller Compatibility | |
| Bluetooth Controllers: | Wired USB Controllers: |
|
|
| Connectivity | Dimensions and Weight |
|
|
| Includes | |
| |
M:V1.12 S:V1.30
Download: https://www.mayflash.com/Support/showdownload.php?lang=en&id=207
Compatible with Google Stadia controller
--Please re-plug the Stadia controller to Magic adapter once it disconnected of not use for several minutes in wired connection
Compatible with Razer Raiju Ultimate controller
--Switch to PC/BT mode for the controller, 6-axis motion control and rumble are not supported.
Supports R1&L1 remapping
--R1=L1, L1=R1 by pressing and holding Start+R1 for 3 seconds.
--Reset to default L1=L1, R1=R1 by pressing and holding Start+L1 for 3 seconds
Change the vibration intensity level from 7 levels to 10
（0% 25% 37.5% 50% 62.5% 75% 87.5% 100% 125% 150%, The default vibration intensity is 100%.）
Adjust the vibration intensity
Quick Start:
Pressing and holding the two buttons R1/RB and R3 for 3-5 seconds until the controller keeps rumbling.
(Note: You need to keep holding these two buttons until you finish the whole process)
To adjust the vibration intensity, press the Directional Pad "Up" or "Down".
To quit the vibration adjusting, release any button of R1/RB or R3 once you have got your preferred vibration intensity.
(Note: No vibration on the Nintendo Switch System mode/LED in red. The vibration is compatible with PS3 Game Console on the PS3 or PC Dinput System mode/LED in blue)
M:V1.11 S:V1.27
Download: https://www.mayflash.com/Support/showdownload.php?lang=en&id=197
Compatible with DualSense Edge controller
M:V1.11 S:V1.26
Download: https://www.mayflash.com/Support/showdownload.php?lang=en&id=192
1. Compatible with more original or third party controllers and arcade stick as below.
| TYPE | WIRED | WIRELESS | |
| PS3 Navigation Controller | CECH-ZCS1U | YES | YES |
| GuliKit KingKong 2 Pro Controller | NS09 | YES | YES (6-axis Motion Control is not supported ) |
| ipega SW001 Wireless Controller | PG-SW001 | YES | YES |
| Flydigi Direwolf Wireless Gaming Controller | Direwolf | YES | BT & 2.4G |
| Razer Atrox Arcade Stick For Xbox One | RZ06-0115 | YES | NO |
2. T-pad supported perfectly while connect PS DualSense controller to Magic-S Pro 2 /Magic-S Ultimate on PlayStation 4 system
M:V1.10 S:V1.25
Download: https://www.mayflash.com/Support/showdownload.php?lang=en&id=185
Compatible with Steam Deck (LED Indicator is Green)
Fix the issue that Xbox 360 wireless controller and the wireless dongle may not be connected successfully.
Fix some issues for PowerA SPCETRA ENHANCED WIRED CONTROLLER.
M:V1.09 S:V1.24
Download: https://www.mayflash.com/Support/showdownload.php?lang=en&id=177
TURBO SETUP:
Going to the SETUP MODE by Pressing and holding "View"+"↑" (Dpad) for 3secs(LED be blinking and controller vibrates shortly).
Press once "View"+the button on the controller(only 8 buttons can be setup . E.G Xbox One controller ，there are A,B,X,Y,LB,LT,RB,RT) . Such as press once "View" +"B" ，the "B" is Turbo button . Second press "View" +"B" ,"B" is Auto Fire button . Third press "View" +"B" , Turbo and auto fire of "B" button will be cancelled .
Turbo speed adjust ，Default speed is 15times/sec ，Press once "View"+"←" ,Turbo speed adjusted to 5times/sec .，Press once "View"+ "→" ,Turbo speed adjusted to 25times/sec .
Exit TURBO MODE by pressing and holding "View" for + "↓" 3secs .
Note：
Turbo CAN be remembered if the controller disconnect with Mayflash adapter or Mayflash adapter disconnect with game console/PC or Reboot game console /awake from slep mode etc after exit TURBO MODE . Otherwise ，it won't be remembered .
selct button doesn't work while TURBO is active . "View" + "HOME/Xbox/PS" combination buttons ="View"
The input lag of A,B,X,Y,LT ,RT ,LB,RB will rising than before if setup it as Turbo！
Touch-Pad supported （Only for PS4 console）
Going to the SETUP MODE by Pressing and holding "View" + "R3"" （"R3" is the pressing-down button of the right joystick），and then release "R3" ，DONOT release "View" once LED be blinking and controller vibrates shortly.
Still holding "View" button to push joystick UP, DOWN, RIGHT, LEFT setup as Tpad-UP, DOWN ,RIGHT, LEFT , Press R3 setup as Pressing-Tpad button.
Exit Touch-pad by releasing "View".
Video: https://youtu.be/0bTT3DCx_CY
Document: https://www.mayflash.com/FAQ/shownews.php?lang=en&id=30
M:V1.07 S:V1.23
Download: https://www.mayflash.com/Support/showdownload.php?lang=en&id=169
Compatible with Mad Catz Street Fighter V FightPad PRO (Wired connection).
Compatible with Betop Zeus T6 Elite Gamepad (Model No. BTP-T6).
Fix some bugs.
M:V1.06 S:V1.22
Download: https://www.mayflash.com/Support/showdownload.php?lang=en&id=163
Fix some controllers rumbling issues used on Switch.
New function: You can switch the different modes by hand once the adapter can't be identified by some game consoles automatically.
Compatible with PowerA Nano Enhanced Wireless Controller for Switch.
M:V1.05 S:V1.22
Download: https://www.mayflash.com/Support/showdownload.php?lang=en&id=161
Compatible with PowerA Nano Enhanced wireless Controller for Nintendo Switch.
M:V1.04 S:V1.21
Download: https://www.mayflash.com/Support/showdownload.php?lang=en&id=159
1. Compatible with PDP Victrix Gambit Xbox Controller.
2. Compatible with Hori wired mini Pad for Switch(NSW-245).
3. Fix some issues that 6 axis gyro of Switch pro does not work well on the wired connection.
Manual:
https://www.mayflash.com/manual/showdownload.php?lang=en&id=156
Differences between MAGIC-S PRO 1 and MAGIC-S PRO 2
MAGIC-S PRO 2 is compatible with Xbox One Bluetooth Controllers, but MAGIC-S PRO 1 is not.
MAGIC-S PRO2 Can NOT connect MAYFLASH Arcade Sticks F300 and F500 to play on PS5, but MAGIC-S PRO 1 can.
MAGIC-S PRO 2 supports bluetooth headsets on PS4 and Switch, but MAGIC-S PRO 1 does not.